Installation manual

INST 030-2
Figure 10
CONDUIT OPENING
A: 12" (30,5 cm) MIN FROM
BOTTOM OF COUNTERTOP
AND ADJACENT CABINET
(RIGHT SIDE)
f I
LOCATIONS
OF ALUMINUM
REFLECTIVE TAPE
TAPE TOP AND
VERTICAL SIDES
OF ;UTOUT
SOLID SURFACE
COUNTERTOP INSTALLATION
Figure 11
INST 005-2
f ..................................................................................................................
WARNING
THE CONDUIT IS 4 FEET LONG
The junction box, must be located where it will
allow considerable slack in the conduit for
serviceability.
Important:
• For solid surface material installations such as
Surel TM and Corian ®, consult with solid surface
manufacturer. Apply heat reflective tape such as
Scotch® Aluminum Foil Tape #425 or #427
around the cutout so that it folds over on the top
and sides.
,, Do not wrap the tape underneath the cooktop.
Be sure the tape extends beyond the outermost
flange of the cooktop. All corners should be
covered with tape.