Installation Manual

English 21
Installation Instructions
Rotating the Blowers for Rear Exhaust, cont.
Re-orienting the Blower(s)
The blower(s) must be correctly positioned.
Hood resting
on its top
Front
Right Side
Left Side
Bottom
Rear
Blower I/O port
(on right for
rear exhaust)
Blower edge
covers exit
vent
1.
2.
Set the hood on its top.
Standing at the rear of the hood and looking
down at the blower, insert the blower so its I/O
port faces right, and its exhaust port is against the
L-bracket at the rear of the hood.
Finalizing the Rear-Vent Setup
Duct collar
RightRear
Top
1. Refasten the cable clamps and assembly to the
hood.
2. Connect the cable assembly to the blower’s I/O
port.
3. Attach the duct collars to the back of the hood.
4. Carefully turn the hood upright.