Installation Manual

22 English

Installation Instructions

Assembling the Filters

Filters are boxed separately with provided hardware and must be assembled during installation.

DHD Baffle-Style Filter

Knob

eveled

Screw M8

Loc

washer

#10

1. Remove the plastic coating, and turn the beveled

lip upward.

2. Align the screw, lock washer, and knob with the

filter. The knob should be on the ridge, and the

screw and lock washer in the trough.

3. Twist-tighten the knob onto each washer/screw.

4. Install the filters after hanging the hood.

Replacement Part # Description

702579 Baffle Filter Kit (1 pc + hardware)

702580

Baffle Filter Kit (2 pc + hardware)

Using the Optional Dual-to-Single Transition Kit #AHT10

2" (5.1 cm)

3/4"

(1.9 cm)

9" (22.9 cm)

32"

(81.3 cm)

13 3/4"

(34.9 cm)

On dual-exhaust models, the two 8” duct exhausts

can be transitioned into one 10” duct.

Assemble the Dacor transition kit #AHT10 (sold

separately) before you hang the hood. This

transition kit fits over the top/rear ventilation exits.

reparing the AHT10

Create a lip arou

nd the transition kit by bending the bottom edges outward at right angles, creating

a 3/4” flange around the base.

Bending the Flanges On the Transition Duct

Top/rear vent: Models DHD30/36/48

All four

corners bent

out 90°