Installation Instructions Modernist Microwave In-A-Drawer™ DMR24M977WM, DMR24M977WM DMR30M977WM, DMR30M977WM Part No.
Contents Before You Begin… 3 Important 3 Customer-Service Information 4 If You Need Help… Model and Serial Numbers Before You Call for Service… 4 4 4 Important Safety Precautions 5 Related Equipment Safety Grounding the Microwave In-A-Drawer™ 5 5 Installation Requirements 7 Checklist 7 Design Specifications 8 Clearances and Dimensions 8 Installation 11 Preparing to Install the Microwave In-A-Drawer™ Provided Material Unpacking the Microwave In-A-Drawer™ About the Electrical Outlet Inst
Before You Begin… Important Installer • For safety and to minimize problems, read this manual thoroughly before starting the installation. • The installer shall ensure proper installation; the warranty does NOT cover product failure due to improper installation. • Remove all packing material before connecting the electrical supply. • Observe all local codes in installing the oven. • Leave this manual with the owner. • Write the oven’s model/serial numbers in this manual for service/maintenance reference.
Customer-Service Information If You Need Help… If you have questions or issues with installation, contact your Dacor® dealer or the Dacor customer-service team. If your Dacor microwave is under warranty, call Dacor Customer Assurance. Have the microwave’s model/serial numbers available when you call. These numbers are on the rating label, which is on the right-hand side of the chassis face. To view the label: On the control panel, press Open. The drawer opens to reveal the label.
Important Safety Precautions Related Equipment Safety Remove all tape and packaging before using the microwave. Dispose of the packaging after unpacking the oven. Do not let children play with the packing material. Do not modify the oven (e.g., remove panels, wire covers, screws). DANGER—ELECTRIC-SHOCK HAZARD • To avoid risk of electrical shock, personal injury, or death; verify your appliance is grounded according to local codes, or in their absence, with the National Electrical Code (NEC).
Important Safety Precautions Follow these precautions with exactness to avoid fire or electrical shock that may cause property damage, personal injury, or death. WARNING • Follow the information in this manual exactly to avoid fire or electrical shock that may cause property damage, personal injury, or death. • Ensure the microwave is properly installed and grounded by a qualified technician.
Installation Requirements Checklist Use this checklist to ensure you complete the installation process properly and verify the oven’s proper function: • Before installing the oven, verify the cabinet dimensions are correct and the required electrical connections are present. • See this manual’s content regarding Safety, Cabinet Dimensions, Removing Packaging, Electrical Installation, Testing the Installation and Customer Service. • Team-lift the unit directly into the cabinet cutout.
Design Specifications Clearances and Dimensions • The dimensions shown in Figures 2, 4, and 5 are minimums and must be used. • The contact surface must be of solid, level, plywood construction strong enough to support the oven’s weight (about 100 lbs). • Locate the unit within easy access of the proper electrical outlet, or locate a new outlet. (See About the Electrical Outlet, pg. 12.) • The oven can be built into a cabinet or wall by itself or under any gas or electric wall oven.
24” Drawer Dimensions, cont. Dim.
30” Drawer Dimensions, cont. 10 Dim. Inches Description A 6 Anti-tip block length B — Electrical outlet location C — Anti-tip block D 5 Outlet location height E 3 1/2 Anti-tip block width F 4 Outlet location width G 22 1/8 min. 28 7/16 max.
Installation Preparing to Install the Microwave In-A-Drawer™ Phillips Screwdriver Drill Provided Material Panhead Screws (4) Literature Kit Unpacking the Microwave In-A-Drawer™ • Remove packing material from the drawer (Do not remove the waveguide cover, which is on the oven-chamber ceiling.) • Remove the “features” sticker. • Check for damage (e.g., loose/bent/misaligned components, damaged drawer seal, dented surfaces). • Report damage to your dealer or a Dacor Authorized Servicer.
Installation About the Electrical Outlet A 120 volt 60 Hz, AC only, 15 amp. or more protected electrical supply is required. It is preferable that the oven be on its own circuit. The drawer has a 3-prong grounding plug that must be plugged into a properly installed and grounded outlet. If only a 2-prong outlet is available, have a qualified electrician install a proper outlet. NOTE: Address any questions to a qualified electrician or service technician.
Instructions D’installation Modernist Micro-Onde Tiroir™ DMR24M977WM, DMR24M977WM DMR30M977WM, DMR30M977WM
Table des Matières Avant de Commencer… 3 Important 3 Information Pour le Service à la Clientèle 4 Pour Obtener de L’aide… Nombre de modèles et de séries Before You Call for Service… 4 4 4 Important Précautions de Sécurité 5 Related Equipment Safety Grounding the Microwave In-A-Drawer™ 5 5 Conditions D’installation 7 Liste de Contrôle 7 Les Spécifications de Conception 8 Clearances and Dimensions 8 Installation 11 Preparing to Install the Microwave In-A-Drawer™ Provided Material Unpacki
Before You Begin… Important Installer • For safety and to minimize problems, read this manual thoroughly before starting the installation. • The installer shall ensure proper installation; the warranty does NOT cover product failure due to improper installation. • Remove all packing material before connecting the electrical supply. • Observe all local codes in installing the oven. • Leave this manual with the owner. • Write the oven’s model/serial numbers in this manual for service/maintenance reference.
Customer-Service Information If You Need Help… If you have questions or issues with installation, contact your Dacor® dealer or the Dacor customer-service team. If your Dacor microwave is under warranty, call Dacor Distinctive Service. Have the microwave’s model/serial numbers available when you call. Dacor Modernist Service (under-warranty repairs only) Phone: 800-793-0093 x2822 (USA and Canada) Mon – Fri, 6:00 a.m. – 5:00 p.m.
Important Safety Precautions Related Equipment Safety Remove all tape and packaging before using the microwave. Dispose of the packaging after unpacking the oven. Do not let children play with the packing material. Do not modify the oven (e.g., remove panels, wire covers, screws). DANGER—ELECTRIC-SHOCK HAZARD • To avoid risk of electrical shock, personal injury, or death; verify your appliance is grounded according to local codes, or in their absence, with the National Electrical Code (NEC).
Important Safety Precautions Follow these precautions with exactness to avoid fire or electrical shock that may cause property damage, personal injury, or death. WARNING • Follow the information in this manual exactly to avoid fire or electrical shock that may cause property damage, personal injury, or death. • Ensure the microwave is properly installed and grounded by a qualified technician.
Installation Requirements Checklist Use this checklist to ensure you complete the installation process properly and verify the oven’s proper function: • Before installing the oven, verify the cabinet dimensions are correct and the required electrical connections are present. • See this manual’s content regarding Safety, Cabinet Dimensions, Removing Packaging, Electrical Installation, Testing the Installation and Customer Service. • Team-lift the unit directly into the cabinet cutout.
Design Specifications Clearances and Dimensions • The dimensions shown in Figures 2, 4, and 5 are minimums and must be used. • The contact surface must be of solid, level, plywood construction strong enough to support the oven’s weight (about 100 lbs). • Locate the unit within easy access of the proper electrical outlet, or locate a new outlet. (See About the Electrical Outlet, pg. 11.) • The oven can be built into a cabinet or wall by itself or under any gas or electric wall oven.
24” Drawer Dimensions, cont. Dim.
30” Drawer Dimensions, cont. 22 A 6 Anti-tip block length B — Electrical outlet location C — Anti-tip block D 5 Outlet location height E 3 1/2 Anti-tip block width F 4 Outlet location width G 22 1/8 min. 28 7/16 max.
Installation Preparing to Install the Microwave In-A-Drawer™ Phillips Screwdriver Drill Provided Material Panhead Screws (4) Literature Kit Unpacking the Microwave In-A-Drawer™ • Remove packing material from the drawer (Do not remove the waveguide cover, which is on the oven-chamber ceiling.) • Remove the “features” sticker. • Check for damage (e.g., loose/bent/misaligned components, damaged drawer seal, dented surfaces). • Report damage to your dealer or a Dacor Authorized Servicer.
Installation About the Electrical Outlet A 120 volt 60 Hz, AC only, 15 amp. or more protected electrical supply is required. It is preferable that the oven be on its own circuit. The drawer has a 3-prong grounding plug that must be plugged into a properly installed and grounded outlet. If only a 2-prong outlet is available, have a qualified electrician install a proper outlet. NOTE: Address any questions to a qualified electrician or service technician.
Dacor ∙ 14425 Clark Avenue, City of Industry, CA 91745 ∙ Phone: (800) 793-0093 ∙ Fax: (626) 403-3130 ∙ www.dacor.
