Installation Guide

23
Installation
Unpacking the Microwave In-A-Drawer
™
Preparing to Install the Microwave In-A-Drawer
™
Phillips Screwdriver Drill
Panhead Screws (4) Literature Kit
• Remove packing material from the drawer
(Do not remove the waveguide cover, which
is on the oven-chamber ceiling.)
• Remove the “features” sticker.
• Check for damage (e.g., loose/bent/mis-
aligned components, damaged drawer seal,
dented surfaces).
• Report damage to your dealer or a Dacor
Authorized Servicer. Do not install/operate
a damaged appliance.
Provided Material