Installation Manual

English 63
Installation instructions
Removal and Re-installation
Removing the Range for Service
1. Turn the gas supply valve to the off position.
2. Turn off power to the range at the circuit breaker panel or fuse box.
3. Pull the range out from the wall
Reinstalling the Range After Service
1. Push the range into operating position, making sure the anti tip bracket is engaged
(see page 51).
2. Turn on power to the range at the circuit breaker panel or fuse box.
3. Turn the gas supply valve to the on position.
Install_NY9900M_PRORANGE_DOP48M96DLM_DA_DG68-00936A-00_EN+MES+CFR.indb 63 2017-05-12  7:36:55