Installation Instructions
Table Of Contents
- Before you begin
- Customer service information
- Important safety instructions
- Product specifications
- Installation requirements
- Installation instructions
- Antes de comenzar
- Información del servicio al cliente
- Instrucciones de seguridad importantes
- Especificaciones del producto
- Requisitos de instalación
- Instrucciones de instalación
- Avant de commencer
- Informations relatives au service client
- Consignes de sécurité importantes
- Caractéristiques techniques de l'appareil
- Conditions d'installation
- Consignes d'installation
English 45
Installation instructions
Cooktop assembly
Assembling the rangetop burners
CAUTION
• Do not operate the rangetop burners without all burner parts in place.
• Do not push in any rangetop controls while removing the burner; a slight electrical
shock might result, perhaps causing you to knock over hot cookware.
• Do not risk electric shock by removing the top or touching the electrode of any burner
while another burner is on.
B
A
C
A B
A. Single
B. Dual
C. Brass
1. Place the burner heads on the burner
bases as shown at left. (The electrodes
fit in the slot in the bottom of the
heads.) The heads should be flat and
parallel to the rangetop.
2. Place the matching size caps on top of
each rangetop burner head.
Install_NX9900R_PRORANGE_DOP36M96_DA_DG68-01106C-02_EN+MES+CFR.indb 45 2019-08-13 6:30:55