User Manual
Table Of Contents
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN
- Before you begin
- Regulatory Notice
- Important safety instructions
- Overview
- Using the cooktop
- Using the oven
- Basic settings – Clock, Date & Time, Language
- Kitchen timer
- Timed cooking
- Delay start
- Oven functions
- Setting the mode
- Setting the temperature
- Basic baking and broiling instructions
- Using the oven racks
- Using the gliding rack
- Using the special function feature
- Using the healthy cook feature
- Using the temperature probe
- Using the clean feature
- Using the Sabbath feature
- Using the iQ Control feature
- To start the oven remotely
- Child Lock
- Settings
- Care and maintenance - Cooktop
- Care and maintenance - Oven
- Troubleshooting
- Warranty and Service
- Open-Source Announcement
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_MES
- Antes de comenzar
- Aviso sobre regulaciones
- Instrucciones de seguridad importantes
- Descripción general
- Uso de la placa de cocción
- Uso del horno
- Ajustes básicos – reloj, fecha y hora, idioma
- Temporizador de cocina
- Cocción por temporizador
- Retrasar el inicio
- Funciones del horno
- Configuración del modo
- Ajuste de la temperatura
- Instrucciones básicas de horneado y asado a la parrilla
- Uso de las rejillas del horno
- Uso de la rejilla deslizante
- Uso de la función especial
- Uso de la función de comida saludable
- Uso de la sonda de temperatura
- Uso de la función de limpieza
- Uso de la función sabbat
- Uso de la función de iQ Control
- Para iniciar el horno de manera remota
- Seguro para niños
- Configuración
- Cuidado y mantenimiento - placa de cocción
- Cuidado y mantenimiento - horno
- Resolución de problemas
- Garantía y servicio técnico
- Anuncio de código abierto
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_CFR
- Avant de commencer
- Informations relatives à la réglementation
- Consignes de sécurité importantes
- Présentation
- Utilisation de la table de cuisson
- Utilisation du four
- Paramètres de base : horloge, date et heure, langue
- Minuterie
- Cuisson minutée
- Cuisson différée
- Fonctions du four
- Réglage du mode
- Réglage de la température
- Instructions pour la cuisson traditionnelle et la cuisson au gril
- Utilisation des grilles du four
- Utilisation de la grille coulissante
- Utilisation de la fonction mode spécial
- Utilisation de la fonction Cuisson santé
- Utilisation de la sonde de température
- Utilisation de la fonction nettoyage
- Utilisation de la fonction mode sabbat
- Utilisation de la fonction iQ Control
- Pour démarrer le four à distance
- Verrouillage parental
- Paramètres
- Précautions d'entretien : table de cuisson
- Précautions d'entretien : four
- Dépannage
- Garantie et assistance
- Annonce de source libre
English 17
Important safety instructions
Electrical and grounding safety
WARNING
To reduce the risk of fire, electric shock, personal injury, or death, observe these
precautions:
• Plug the range into a grounded 4-prong outlet.
• Do not remove the ground prong.
• Do not use an adapter or an extension cord.
• Do not use a damaged power plug, power cord, or loose power outlet.
• Do not modify the power plug, cord, or outlet.
• Do not put a fuse in a neutral or ground circuit.
• Use a dedicated 120 Vac , 60-Hz, 20-Amp breaker for this Range. A time-delay fuse or
circuit breaker is recommended. Do not plug more than one appliance into this circuit.
• Do not connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
• This range must be grounded. If the range malfunctions or breaks down, grounding
reduces the risk of electric shock by providing a safe path for the current. This range’s
power cord has a grounding plug, which must be firmly plugged into an outlet that is
properly installed and grounded according to local regulations. If you are not sure your
electrical outlet is properly grounded, have it checked by a licensed electrician.
• The range is supplied with a 4-pronged grounded plug. This cord must be plugged into
a mating, grounded 4-prong outlet that meets all local codes and ordinances. If codes
permit the use of a separate ground wire, we recommend that a qualified electrician
determine the proper path for this ground wire.
• Electrical service to the range must conform to local codes. Barring local codes,
it should meet the latest ANSI/NFPA No. 70 – Latest Revision (for the U.S.) or the
Canadian Electrical Code CSA C22.1 – Latest Revisions.
• The range owner shall ensure that the proper electrical service is provided for the
range.
NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN.indd 17 2019-07-29 10:52:32