User Manual
Table Of Contents
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN
- Before you begin
- Regulatory Notice
- Important safety instructions
- Overview
- Using the cooktop
- Using the oven
- Basic settings – Clock, Date & Time, Language
- Kitchen timer
- Timed cooking
- Delay start
- Oven functions
- Setting the mode
- Setting the temperature
- Basic baking and broiling instructions
- Using the oven racks
- Using the gliding rack
- Using the special function feature
- Using the healthy cook feature
- Using the temperature probe
- Using the clean feature
- Using the Sabbath feature
- Using the iQ Control feature
- To start the oven remotely
- Child Lock
- Settings
- Care and maintenance - Cooktop
- Care and maintenance - Oven
- Troubleshooting
- Warranty and Service
- Open-Source Announcement
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_MES
- Antes de comenzar
- Aviso sobre regulaciones
- Instrucciones de seguridad importantes
- Descripción general
- Uso de la placa de cocción
- Uso del horno
- Ajustes básicos – reloj, fecha y hora, idioma
- Temporizador de cocina
- Cocción por temporizador
- Retrasar el inicio
- Funciones del horno
- Configuración del modo
- Ajuste de la temperatura
- Instrucciones básicas de horneado y asado a la parrilla
- Uso de las rejillas del horno
- Uso de la rejilla deslizante
- Uso de la función especial
- Uso de la función de comida saludable
- Uso de la sonda de temperatura
- Uso de la función de limpieza
- Uso de la función sabbat
- Uso de la función de iQ Control
- Para iniciar el horno de manera remota
- Seguro para niños
- Configuración
- Cuidado y mantenimiento - placa de cocción
- Cuidado y mantenimiento - horno
- Resolución de problemas
- Garantía y servicio técnico
- Anuncio de código abierto
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_CFR
- Avant de commencer
- Informations relatives à la réglementation
- Consignes de sécurité importantes
- Présentation
- Utilisation de la table de cuisson
- Utilisation du four
- Paramètres de base : horloge, date et heure, langue
- Minuterie
- Cuisson minutée
- Cuisson différée
- Fonctions du four
- Réglage du mode
- Réglage de la température
- Instructions pour la cuisson traditionnelle et la cuisson au gril
- Utilisation des grilles du four
- Utilisation de la grille coulissante
- Utilisation de la fonction mode spécial
- Utilisation de la fonction Cuisson santé
- Utilisation de la sonde de température
- Utilisation de la fonction nettoyage
- Utilisation de la fonction mode sabbat
- Utilisation de la fonction iQ Control
- Pour démarrer le four à distance
- Verrouillage parental
- Paramètres
- Précautions d'entretien : table de cuisson
- Précautions d'entretien : four
- Dépannage
- Garantie et assistance
- Annonce de source libre
English28
Using the cooktop
Using the cooktop
Ignition
LO
MED
OFF
HI
NOTE
Each control knob has a corresponding
burner. The location of corresponding
burner is marked next to the knob.
To light a burner :
1. Push in the knob and turn it counterclockwise to the Lite position. The igniter for
the burner will spark repeatedly until it lights. The spark makes a “clicking” sound.
The burner should light within four seconds. The flame should burn evenly around
the burner, except underneath each grate support finger, where the flame height is
reduced by Dacor’s Smart Flame feature. A normal flame is steady and blue. Foreign
material in the gas line, especially in new construction, may cause a temporary orange
flame during initial operation. Small yellow tips on the flames are normal when using
LP gas. If a burner does not ignite, the igniter continues to spark or if the flame is not
spread evenly around the burner cap, see the Troubleshooting section on page 93.
2. Place the cooking utensil on the grate.
3. Adjust the flame to the cooking task.
NOTE
Turn off the burner if there is no spark, and verify that power is supplied to the range.
Never manually light a burner during a power failure.
NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN.indd 28 2019-07-29 10:52:36