User Manual
Table Of Contents
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN
- Before you begin
- Regulatory Notice
- Important safety instructions
- Overview
- Using the cooktop
- Using the oven
- Basic settings – Clock, Date & Time, Language
- Kitchen timer
- Timed cooking
- Delay start
- Oven functions
- Setting the mode
- Setting the temperature
- Basic baking and broiling instructions
- Using the oven racks
- Using the gliding rack
- Using the special function feature
- Using the healthy cook feature
- Using the temperature probe
- Using the clean feature
- Using the Sabbath feature
- Using the iQ Control feature
- To start the oven remotely
- Child Lock
- Settings
- Care and maintenance - Cooktop
- Care and maintenance - Oven
- Troubleshooting
- Warranty and Service
- Open-Source Announcement
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_MES
- Antes de comenzar
- Aviso sobre regulaciones
- Instrucciones de seguridad importantes
- Descripción general
- Uso de la placa de cocción
- Uso del horno
- Ajustes básicos – reloj, fecha y hora, idioma
- Temporizador de cocina
- Cocción por temporizador
- Retrasar el inicio
- Funciones del horno
- Configuración del modo
- Ajuste de la temperatura
- Instrucciones básicas de horneado y asado a la parrilla
- Uso de las rejillas del horno
- Uso de la rejilla deslizante
- Uso de la función especial
- Uso de la función de comida saludable
- Uso de la sonda de temperatura
- Uso de la función de limpieza
- Uso de la función sabbat
- Uso de la función de iQ Control
- Para iniciar el horno de manera remota
- Seguro para niños
- Configuración
- Cuidado y mantenimiento - placa de cocción
- Cuidado y mantenimiento - horno
- Resolución de problemas
- Garantía y servicio técnico
- Anuncio de código abierto
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_CFR
- Avant de commencer
- Informations relatives à la réglementation
- Consignes de sécurité importantes
- Présentation
- Utilisation de la table de cuisson
- Utilisation du four
- Paramètres de base : horloge, date et heure, langue
- Minuterie
- Cuisson minutée
- Cuisson différée
- Fonctions du four
- Réglage du mode
- Réglage de la température
- Instructions pour la cuisson traditionnelle et la cuisson au gril
- Utilisation des grilles du four
- Utilisation de la grille coulissante
- Utilisation de la fonction mode spécial
- Utilisation de la fonction Cuisson santé
- Utilisation de la sonde de température
- Utilisation de la fonction nettoyage
- Utilisation de la fonction mode sabbat
- Utilisation de la fonction iQ Control
- Pour démarrer le four à distance
- Verrouillage parental
- Paramètres
- Précautions d'entretien : table de cuisson
- Précautions d'entretien : four
- Dépannage
- Garantie et assistance
- Annonce de source libre
English74
Care and maintenance - Cooktop
Care and maintenance - Cooktop
Stainless steel surfaces
1. Remove any spills, spots, and grease stains using a soft, wet cloth.
2. Apply an approved stainless steel cleaner to a cloth or paper towel.
3. Clean one small area at a time, rubbing with the grain of the stainless steel if
applicable.
4. Dry the surface with a soft, dry cloth.
5. Repeat Steps 2 - 4 as needed.
CAUTION
• Do not use items (e.g., steel-wool pad, sharp scraper, abrasive cleanser, caustic lye/
sodium hydroxide), which can mar the steel and damage components.
• Do not remove the spill tray to clean it. The gas lines leading to the burner manifolds
can be damaged, possibly causing a fire or malfunction.
• Do not pour water into the cooktop. The water could drip into the gas and electrical
systems, creating an electric shock hazard or high levels of carbon monoxide (CO) from
corroded gas valves/ports.
• Do not spray any type of cleaner into the manifold holes. The ignition system inside
them must remain dry.
NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN.indd 74 2019-07-29 10:52:46