User Manual
Table Of Contents
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN
- Before you begin
- Regulatory Notice
- Important safety instructions
- Overview
- Using the cooktop
- Using the oven
- Basic settings – Clock, Date & Time, Language
- Kitchen timer
- Timed cooking
- Delay start
- Oven functions
- Setting the mode
- Setting the temperature
- Basic baking and broiling instructions
- Using the oven racks
- Using the gliding rack
- Using the special function feature
- Using the healthy cook feature
- Using the temperature probe
- Using the clean feature
- Using the Sabbath feature
- Using the iQ Control feature
- To start the oven remotely
- Child Lock
- Settings
- Care and maintenance - Cooktop
- Care and maintenance - Oven
- Troubleshooting
- Warranty and Service
- Open-Source Announcement
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_MES
- Antes de comenzar
- Aviso sobre regulaciones
- Instrucciones de seguridad importantes
- Descripción general
- Uso de la placa de cocción
- Uso del horno
- Ajustes básicos – reloj, fecha y hora, idioma
- Temporizador de cocina
- Cocción por temporizador
- Retrasar el inicio
- Funciones del horno
- Configuración del modo
- Ajuste de la temperatura
- Instrucciones básicas de horneado y asado a la parrilla
- Uso de las rejillas del horno
- Uso de la rejilla deslizante
- Uso de la función especial
- Uso de la función de comida saludable
- Uso de la sonda de temperatura
- Uso de la función de limpieza
- Uso de la función sabbat
- Uso de la función de iQ Control
- Para iniciar el horno de manera remota
- Seguro para niños
- Configuración
- Cuidado y mantenimiento - placa de cocción
- Cuidado y mantenimiento - horno
- Resolución de problemas
- Garantía y servicio técnico
- Anuncio de código abierto
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_CFR
- Avant de commencer
- Informations relatives à la réglementation
- Consignes de sécurité importantes
- Présentation
- Utilisation de la table de cuisson
- Utilisation du four
- Paramètres de base : horloge, date et heure, langue
- Minuterie
- Cuisson minutée
- Cuisson différée
- Fonctions du four
- Réglage du mode
- Réglage de la température
- Instructions pour la cuisson traditionnelle et la cuisson au gril
- Utilisation des grilles du four
- Utilisation de la grille coulissante
- Utilisation de la fonction mode spécial
- Utilisation de la fonction Cuisson santé
- Utilisation de la sonde de température
- Utilisation de la fonction nettoyage
- Utilisation de la fonction mode sabbat
- Utilisation de la fonction iQ Control
- Pour démarrer le four à distance
- Verrouillage parental
- Paramètres
- Précautions d'entretien : table de cuisson
- Précautions d'entretien : four
- Dépannage
- Garantie et assistance
- Annonce de source libre
English 79
Care and maintenance - Cooktop
Burner head and cap replacement
Dual Burner head / caps
1. Orient the burner head so the electrode
opening aligns with the electrode itself.
2. Install the burner head so the electrode
passes through its opening in the head.
Verify that the burner head lies flat on
the cooktop.
3. Match the burner caps to the burners
by size, and then re-install the caps on
the burner heads.
CAUTION
Each cap fits on a specific burner head.
Verify that each cap is installed and lies
flat on the correct head.
NOTE
After installing the burners, verify that
they will work properly.
Improperly installed components will
result in poor ignition or uneven flames
as shown in the illustration at left. If
the burner shows uneven flame and
excessive yellow flame, shut off the burner
immediately and let the burner cool down.
Readjust the burner caps and try lighting
the burner again. A good flame shows all
blue and even flame around the burner.
NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN.indd 79 2019-07-29 10:52:47