User Manual
Table Of Contents
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN
- Before you begin
- Regulatory Notice
- Important safety instructions
- Overview
- Using the cooktop
- Using the oven
- Basic settings – Clock, Date & Time, Language
- Kitchen timer
- Timed cooking
- Delay start
- Oven functions
- Setting the mode
- Setting the temperature
- Basic baking and broiling instructions
- Using the oven racks
- Using the gliding rack
- Using the special function feature
- Using the healthy cook feature
- Using the temperature probe
- Using the clean feature
- Using the Sabbath feature
- Using the iQ Control feature
- To start the oven remotely
- Child Lock
- Settings
- Care and maintenance - Cooktop
- Care and maintenance - Oven
- Troubleshooting
- Warranty and Service
- Open-Source Announcement
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_MES
- Antes de comenzar
- Aviso sobre regulaciones
- Instrucciones de seguridad importantes
- Descripción general
- Uso de la placa de cocción
- Uso del horno
- Ajustes básicos – reloj, fecha y hora, idioma
- Temporizador de cocina
- Cocción por temporizador
- Retrasar el inicio
- Funciones del horno
- Configuración del modo
- Ajuste de la temperatura
- Instrucciones básicas de horneado y asado a la parrilla
- Uso de las rejillas del horno
- Uso de la rejilla deslizante
- Uso de la función especial
- Uso de la función de comida saludable
- Uso de la sonda de temperatura
- Uso de la función de limpieza
- Uso de la función sabbat
- Uso de la función de iQ Control
- Para iniciar el horno de manera remota
- Seguro para niños
- Configuración
- Cuidado y mantenimiento - placa de cocción
- Cuidado y mantenimiento - horno
- Resolución de problemas
- Garantía y servicio técnico
- Anuncio de código abierto
- NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_CFR
- Avant de commencer
- Informations relatives à la réglementation
- Consignes de sécurité importantes
- Présentation
- Utilisation de la table de cuisson
- Utilisation du four
- Paramètres de base : horloge, date et heure, langue
- Minuterie
- Cuisson minutée
- Cuisson différée
- Fonctions du four
- Réglage du mode
- Réglage de la température
- Instructions pour la cuisson traditionnelle et la cuisson au gril
- Utilisation des grilles du four
- Utilisation de la grille coulissante
- Utilisation de la fonction mode spécial
- Utilisation de la fonction Cuisson santé
- Utilisation de la sonde de température
- Utilisation de la fonction nettoyage
- Utilisation de la fonction mode sabbat
- Utilisation de la fonction iQ Control
- Pour démarrer le four à distance
- Verrouillage parental
- Paramètres
- Précautions d'entretien : table de cuisson
- Précautions d'entretien : four
- Dépannage
- Garantie et assistance
- Annonce de source libre
English 83
Care and maintenance - Oven
To lubricate the slides of the gliding rack
1. Remove the rack from the oven. See
removing the gliding rack in the Using
the gliding rack section on page 49.
2. Fully extend the rack on a table or
countertop. Newspaper may be placed
underneath the rack for easy cleanup.
3. If there is debris in the slide tracks,
wipe it away using a paper towel. (Any
graphite lubricant wiped away must be
replaced - See steps 4 through 7.)
4. Shake the graphite lubricant before
opening it. Starting with the left (front
and back) slide mechanism of the rack,
place four (4) small drops of lubricant
on the two (2) bottom tracks of the
slide close to the bearing carriers.
NX9900R_PRO RANGE_DOP36M96GL_DG68-01105C-02_EN.indd 83 2019-07-29 10:52:48