User Guide
Table Of Contents
- Important Information
- Safety information
- What you need to know about the safety instructions
- Important safety symbols and precautions:
- State of California Proposition 65 Warning
- Important safety precautions
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Installation
- Operations
- Control panel
- Setting the desired temperature or function
- Turning on or off the AutoFill Pitcher
- Turning on or off the ice maker
- Changing the temperature scale
- Turning on or off the Peak Demand function
- Activating or deactivating the Sabbath mode
- Activating or deactivating the Cooling Off mode
- Resetting or dismissing the water filter replacement alarm
- SmartThings
- SMART GRID Function (Demand Response)
- Special features
- Maintenance
- Troubleshooting
- Warranty
- Regulatory Notice
- Open Source Announcement
English 21
Installation
Detach the fridge doors
1. With the doors closed, use a Phillips
screwdriver to remove the screws (x3)
from the top cover. Pull up and remove
the top cover with the connectors.
2. Disconnect the two wire connectors on
the left door.
CAUTION
• Do not remove both doors
simultaneously. Make sure to remove
one door at a time. Otherwise, any of
the doors may fall and cause physical
injury.
• Make sure the refrigerator is off before
disconnecting the connectors.
3. Disconnect the water tube from the
coupler on the left door as shown.
4. Gently draw up the clamp in several
steps. To prevent nger injuries, do not
apply a sudden force to the clamp.
Dacor_T-TYPE_RF7000AC_DA68-04278M-00_EN.indd 21 2022-04-28 10:55:30