User Guide
Table Of Contents
- Important Information
- Safety information
- What you need to know about the safety instructions
- Important safety symbols and precautions:
- State of California Proposition 65 Warning
- Important safety precautions
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Installation
- Operations
- Control panel
- Setting the desired temperature or function
- Turning on or off the AutoFill Pitcher
- Turning on or off the ice maker
- Changing the temperature scale
- Turning on or off the Peak Demand function
- Activating or deactivating the Sabbath mode
- Activating or deactivating the Cooling Off mode
- Resetting or dismissing the water filter replacement alarm
- SmartThings
- SMART GRID Function (Demand Response)
- Special features
- Maintenance
- Troubleshooting
- Warranty
- Regulatory Notice
- Open Source Announcement
Installation
English28
Installation
STEP 4 Leveling the refrigerator
CAUTION
• When installed, the refrigerator must be leveled on a at, solid oor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Leveling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear.
Level the refrigerator using the special screws (levelers) on the front legs. Use a at-head
screwdriver to turn the levelers.
• To adjust the height of the left side:
Insert a at-head screwdriver into the
leveler of the left side front leg. Turn the
leveler clockwise to raise the left side or
turn it counterclockwise to lower.
• To adjust the height of the right side:
Insert a at-head screwdriver into the
leveler of the right side front leg. Turn
the leveler clockwise to raise the right
side or turn it counterclockwise to lower.
Dacor_T-TYPE_RF7000AC_DA68-04278M-00_EN.indd 28 2022-04-28 10:55:32