User Guide
Table Of Contents
- Important Information
- Safety information
- What you need to know about the safety instructions
- Important safety symbols and precautions:
- State of California Proposition 65 Warning
- Important safety precautions
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Installation
- Operations
- Control panel
- Setting the desired temperature or function
- Turning on or off the AutoFill Pitcher
- Turning on or off the ice maker
- Changing the temperature scale
- Turning on or off the Peak Demand function
- Activating or deactivating the Sabbath mode
- Activating or deactivating the Cooling Off mode
- Resetting or dismissing the water filter replacement alarm
- SmartThings
- SMART GRID Function (Demand Response)
- Special features
- Maintenance
- Troubleshooting
- Warranty
- Regulatory Notice
- Open Source Announcement
English 31
Installation
Adjusting the freezer door height (applicable models only)
• Before aligning the door height, make
sure the refrigerator is level. Use the
leveling legs for this purpose.
• You can adjust the height of both
freezer doors using the lever located at
the bottom hinge.
• Open the door, lift it a little, and then
turn the lever left or right to adjust the
height.
Adjusting the gap between the fridge doors and the main body of the refrigerator
(applicable models only)
• You can adjust the gap between both
fridge doors and the main body of the
refrigerator using the adjustment bolt
located at the bottom of the fridge
compartment.
• Lift the door gasket and located the
adjustment bolt underneath the gasket.
Use the 4 mm Allen wrench to adjust
the gap.
CAUTION
Make sure you rmly attach the gasket.
Otherwise, cold air from the refrigerator
may leak.
Dacor_T-TYPE_RF7000AC_DA68-04278M-00_EN.indd 31 2022-04-28 10:55:33