User Guide

English 41
Operations
Activating or deactivating the Cooling Off mode
The Cooling Off mode (also called the Shop mode) is designed for retailers to display
refrigerators on a retail oor. In the Cooling Off mode, the refrigerator’s fan motor and
lights operate normally, but the compressors do not run, so neither the refrigerator nor the
freezer becomes cold.
• To activate or deactivate the Cooling Off mode, tap and hold and simultaneously
for 6 seconds. Then, when the display blinks, press .
- When the Cooling Off mode is on, the refrigerator chime sounds, and the refrigerator
shows “0” on the fridge indicator and “FF” on the freezer indicator.
Resetting or dismissing the water lter replacement alarm
The water lter replacement icon ( ) blinks to alert the user that it is time to replace
the water lter. You can replace the water lter immediately and reset the water lter
replacement alarm, or dismiss the alarm if you want to change the water lter later.
1. Tap any button ( , , or ) to wake up the display.
- This step may not apply to some models.
2. Tap until the Water Filter indicator blinks.
3. Tap or to select Reset or Later.
- If you have changed the water lter, tap to reset the water lter replacement
alarm.
- If you want to change the water lter later and dismiss the alarm, tap .
4. Wait for 5 seconds or tap to conrm your selection.
- The Water Filter indicator stops blinking.
Dacor_T-TYPE_RF7000AC_DA68-04278M-00_EN.indd 41 2022-04-28  10:55:36