Product data

Unpack the Cooktop
WARNING
• If the gas and electric service provided does not
meet the product specifications, do not proceed with
the installation. Call the dealer, the gas supplier or a
licensed electrician.
• The cooktop is heavy. A mini mum of two people are
required to safely install it.
Unpack the parts box and verify that all required compo-
nents have been provided. If any item is missing or dam-
aged, please contact your dealer immediately. Do not install
a damaged or incomplete appliance. The customer must
report cosmetic issues within 30 days of installation.
• Knobs (see table below)
• Grates (see table below)
• Standard burner caps (see table below)
• Standard burner rings (see table below)
• SimmerSear TM inner burner caps (see table below)
• SimmerSear outer burner caps (see table below)
• SimmerSear burner rings (see table below)
• Hold down bolts/washers (2 sets)
• Regulator
• Dacor Stainless Steel Cleaner
• Literature kit
INCLUDED GRATES AND BURNER PARTS
Quantity Quantity
for Model
DRT304S DRT366S
Knobs, standards 3 4
Knobs, SimmerSear 1 2
10 inch grate none 1
12 inch grate none 2
14 inch grate 2 none
Standard burner cap, small 1 2
Standard burner ring, small 1 2
Standard burner cap, large 2 2
Standard burner ring, large 2 2
SimmerSear burner ring 1 2
SimmerSear
1 2
inner burner cap
SimmerSear
1 2
outer burner cap
Cooktop
Installation
WARNING
install t only after the cooktop is mounted in its per-
manent posit onl
, Donot over4ighten the hold down bolts. Over tight-
ening the hold down bolts may result in improper
operation of the dual gas burners.
IMPORTANT
n0t use a hardening compOUnd or Caulk to
rmanently seal the cooktop into place: The cooktop
must be readily removable if service is requ!redl Removal
of sealant to service the unit will be performed at the
customer!s expense.
1. Lower the cooktop into the cutout while feeding the
electrical cord into the utility cutout. Center the cooktop
in the cutout.
2. Secure the cooktop to the countertop using the two (2)
provided hold-down bolts and washers provided. Do
not overtighten the bolts.
_mCDK 7