Quick Start Guide

English 41
10. Leveling the Refrigerator
3/8” (10 mm) bit
1. Using your drill and the bit shown
below, engage each of the refrigerator’s
adjuster shafts in turn, and level the
refrigerator. (CW , CCW )
2. Adjust the gap between the furniture
and Refrigerator top cover to 1/8 in.
(3 mm).
CAUTION
The front and rear leveling legs have a
maximum height adjustment of 3/4 in.
(20 mm).
If greater height is required, the installer
may raise the refrigerator on a sheet of
plywood or runners.
Raising the refrigerator above 3/4 in.
(20 mm) will damage the front and rear
leveling components.
Adjustable shaft
(3/8”, 10 mm)
Front Rear
Jack type (height adjustment)
Max
20 mm
Dacor_OneDoor_BRR9000M_IM_DA68-03621B-02_EN.indd 41 2017-03-20  4:13:05