Installation Guide

Connecting the gas supply
1. Shut off the main gas-supply valve before disconnecting the old cooktop.
2. Complete the gas hookup.
3. Open the gas valve, and relight the burners on any other gas appliances.
NOTE
Because hard piping restricts movement of the cooktop, use a CSA International-certified
flexible metal appliance connector unless local codes require hard piping.
WARNING
Follow the information in this manual exactly to avoid a fire or explosion, which may
cause property damage and personal injury or death.
• Do not store/use flammable liquids near the cooktop.
• IF YOU SMELL GAS:
- DO NOT light a match, candle, or cigarette.
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch.
- DO NOT use any phone in your building.
- Evacuate the building.
- Immediately, from a neighbor’s phone, call the gas supplier, and follow their
directions. (If you cannot reach the supplier, call the fire department.)
• Installation and service must be performed by a qualified installer, service agency,
or gas supplier.
• Install the prov
ided gas regulator. Do not use the cooktop without it.
• Ensure the regulator arrow points toward the cooktop.
• Do not overtighten gas connections and fittings.
• Before use, test the gas lines for leaks as instructed. Do not test with a flame.
20
English