Installation Guide

Installation instructions
Never install an old connector on a new cooktop. For hard piping, carefully align the
pipe; the cooktop cannot be moved once the connection is made.
To prevent gas leaks, apply pipe-joint compound or wrap pipe-thread tape with Teflon
on all male (external) pipe threads.
1. Attach the provided gas-pressure regulator to the cooktop pipe nipple inlet. (For
tight installations, the regulator may be installed upstream from the nipple,
anywhere between the shut-off valve and th
e cooktop. However, to minimize gas-
pressure loss, attach the regulator as close as possible to the cooktop gas inlet.
2. Complete the connection by installing a flexible gas line between the pressure
regulator and the shut-off valve.
Flexible connector hookup
Installer: Inform the consumer of the location of the gas shut-off valve.
Gas Shut-Off Valve
Flex
Connector
(6-ft max.)
0.5-in or 0.75-in
Gas Pipe
Adapter
Adapter
Gas Flow into Cooktop
Pressure
Regulator
Tubing Line
to Cooktop
Control
Manifold
NOTE
The gas shut-off valve should be
installed on the gas piping, away from
the appliance, and easily accessi
ble for
quick opening/closing.
English 21