Installation Guide

Installation instructions
For NG
For LP
NOTE
• The included dual burner head is not
a substitute. One is for LP gas and the
other is for LN gas. Use appropriate gas
type.
- Dual burner head for LP gas is
packed with a plastic bag.
- The letter "For LP" or "For NG" is
engraved on the dual burner head.
• LP burner head also can be found by
the number of holes.
- The burner head with 14 holes in a
quadrant is for LP gas use.
- The burner head with 12 holes in a
quadrant is for LN gas use.
Round Burner head / caps
1. Put the burner heads on their bases as
sh
own at left. The bottom of the head
fits within the burner base.
2. Turn the head until it drops into place.
Wiggle the head slightly to determine
it is properly seated.
3. Put the burner caps (brass or porcelain)
atop the burner heads. The ridge
around the bottom edge of the cap fits
around the top of the burner head.
CAUTION
Ensure all burner components (heads and
caps) rest flat and snugly in place.
English 25