Installation Guide

Installation instructions
NOTE
115
Orice markings:
115 – Denotes 1.15 mm orice size opening.
Required tools
Adjustable wrench ½” open-end wrench Screwdrivers: Phillips
Small flat-bladed precision
screwdriver
Nut drivers:
9
/32” or 7 mm
To convert the cooktop for LP gas, perform these steps:
1. Disconnect electrical power to the cooktop. (Unplug the cooktop, trip the circuit
breaker, or remove the fuse.)
2. Close the manual shut-off valve to cut the gas supply to the cooktop.
English 31