Installation Guide
Table Of Contents
Safety and warning information
Installation safety
WARNING
To reduce risk of fire, electric shock, personal injury, or death, observe these precautions:
• The cooktop should be installed and properly grounded by a qualified installer, as
specified in this manual. Adjustments and service should be performed only by
qualified installer or service technician.
• Do not service/modify/replace the cooktop or any part of it unless directed in this
manual. All other service should be performed by a qualified techni
cian.
• Use only new, flexible connectors when installing the cooktop.
• Ensure the cooktop's hold-down brackets are properly installed.
(See
pg.
26
.
)
• Remove all tape and packaging materials.
• After unpacking the cooktop, remove all accessories from inside and around it.
(Cautiously handle the heavy grates.)
• Verify that nothing came loose during shipping.
• Ensure the cooktop is correctly installed/adjusted by a qualified service technician or
installer for the type of gas (natural or LP) you will use. For the cooktop to use
LP gas, a qualified installer/technician must replace every burner orifice with the
provided LP orifice set, and reverse the GPR adapter. The qualified agency performing
this work shall be responsible for the conversion.
• Installation must conform to local codes or in their absence, to the National Fuel Gas
Code, ANSI Z223.1/NFPA.54, latest edition. In Canada, installation must conform with
the current Natural Gas and Propane Installation Code, CAN/CGA-B149.1, or the
current Propane Installation Code, CAN/CGA-B149.2, and with local codes where
applicable. This cooktop has been design-certified by ETL according to ANSI Z21.1,
latest edition, and Canadian Gas Association according to CAN/CGA-1.1, latest edition.
English 9