User Care Manual
Table Of Contents
- Important safety instructions
- Before you start
- Operation
- Switching the appliance on
- Selecting a cooking zone and power setting
- Switching the appliance off
- Using the Lock
- Timer
- Power boost control
- Power management
- Pause
- Flex zone
- Sound on/off
- Before using the cooktop
- Cookware for induction cooking zones
- Using the correct size cookware
- Pot and pan sizes
- Operating noises
- Using suitable induction cookware
- Temperature detection
- Protecting the cooktop surface
- Using the iQ Connect feature
- Using the hood control feature
- Maintaining your appliance
- Troubleshooting
- Warranty and Service
- Appendix
- Instrucciones de seguridad importantes
- Antes de comenzar
- Operación
- Encendido del electrodoméstico
- Selección de una zona de cocción y un ajuste de potencia
- Apagado del electrodoméstico
- Uso del bloqueo
- Temporizador
- Control de más potencia
- Gestión de potencia
- Pausa
- Zona Flex
- Activar o desactivar las señales sonoras
- Antes de usar la cubierta
- Utensilio de cocina para zonas de cocción por inducción
- Uso del tamaño de utensilio de cocina correcto
- Tamaño de ollas y sartenes
- Ruidos de funcionamiento
- Usar utensilios de cocina adecuados para inducción
- Detección de temperatura
- Protección de la superficie de cocción
- Uso de la función de conexión iQ
- Uso de la función de control de campana
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía y servicio técnico
- Apéndice
- Consignes de sécurité importantes
- Avant de commencer
- Fonctionnement
- Mise sous tension de l'appareil
- Sélectionner une zone de cuisson et un réglage de puissance
- Mise hors tension de l'appareil
- Utilisation de la fonction Verrouillage
- Minuterie
- Commande pleine puissance
- Gestion de la puissance
- Pause
- Zone flex zone
- Activation/Désactivation du son
- Avant d'utiliser la table de cuisson
- Récipients pour les zones de cuisson à induction
- Utiliser des récipients de taille adaptée
- Tailles de récipients et de casseroles
- Bruits de fonctionnement
- Utilisation des récipients adaptés à la cuisson à induction
- Détection de la température
- Protection de la surface lisse
- Utilisation de la fonction iQ Connect
- Utilisation de la fonction de contrôle de la hotte
- Entretien de votre appareil
- Dépannage
- Garantie et assistance
- Annexe
22 English
Operation
Operation
Using the Lock
You can use the Lock to safeguard against a child unintentionally turning on a
cooking zone and activating the cooking surface. Also, the control panel, with the
exception of the POWER key, can be locked to prevent the settings from being
changed unintentionally, for example, by wiping over the panel with a cloth.
Switching the Lock On/Off
36"
1. Touch the Lock key for approximately
3 seconds.
An acoustic signal will sound as
conrmation.
30"
2. Touch any control key.
will appear in the displays,
indicating the Lock has been activated.
3. To switch the Lock off, touch the Lock
key again for 3 seconds. An acoustic
signal will sound as conrmation.
NOTE
• If you activate the Lock while the cooktop is operating, touch the POWER button to turn the
cooktop off for safety reasons.
• If the Lock is enabled when the cooktop is not operating, all buttons will be disabled
including the POWER button.
Timer
1. Press the Timer key. The number 10
will be displayed above the timer
display.
2. Use the Timer setting selectors ( or
) to set the desired amount of time.
Then, press Timer key again.
NOTE
The timer can be adjusted from 0 to 99.
3. To cancel the timer settings, hold down
the Timer key for 3 seconds.
NOTE
• To change the settings quicker, touch and hold any of the
or
control keys
until the desired value is reached.
• When the timer is terminated, it sounds a beep 4 times. However, the cooking
zone will not be turned off.
DTI30P876BB,DTI36P876BB_DG68-01296A-00_EN+MES+CFR.indb 22 2020-06-02 �� 11:21:00