User Care Manual

26 English
Operation
Operation
Sound on/off
1. Touch the POWER key for
approximately 1 second.
2. Touch the key for 3 seconds within
10 seconds of pressing the
POWER key.
3. Sound will turn off and will appear
in the Timer display.
4. To change the Sound setting, repeat
Steps 1 and 2.
Sound will turn ON and
will appear
in the Timer display.
NOTE
To change the Sound On/Off setting, you
must operate the Sound On/Off function
within 10 seconds of turning the power on.
Before using the cooktop
Use quality cookware in good condition
The cookware used with the cooktop
surface should have at bottoms that make
good contact with the entire surface of the
Cooking Zone. Check for atness by rotating
a ruler across the bottom of the cookware.
Be sure to follow all the recommendations
for using cookware.
Also remember to
• Use cookware made with the correct material for induction cooking.
See "Cookware for induction cooking zones" on page 27.
• Use quality cookware with heavier bottoms for better heat distribution. This
provides for more even cooking results.
• The pan size should match the amount of food being prepared.
• Do not let pans boil dry. This may cause permanent damage in the form of
breakage, fusion, or marring that can affect the ceramic cooktop. (This type of
damage is not covered by your warranty).
• Do not use dirty pans with grease buildup. Always use pans that are easy to
clean after cooking.
CAUTION
• The Cooking Zones may appear to be cool while turned ON and after they
have been turned OFF. The glass surface may be HOT from residual heat
transferred from the cookware and burns may occur.
• DO NOT TOUCH HOT COOKWARE or PANS directly with your hands. Always
use oven mitts or pot holders to protect your hands from burns.
• DO NOT SLIDE cookware across the cooktop surface. Doing so may
permanently damage the appearance of the ceramic cooktop.
DTI30P876BB,DTI36P876BB_DG68-01296A-00_EN+MES+CFR.indb 26 2020-06-02 �� 11:21:02