User Care Manual
Table Of Contents
- Important safety instructions
- Before you start
- Operation
- Switching the appliance on
- Selecting a cooking zone and power setting
- Switching the appliance off
- Using the Lock
- Timer
- Power boost control
- Power management
- Pause
- Flex zone
- Sound on/off
- Before using the cooktop
- Cookware for induction cooking zones
- Using the correct size cookware
- Pot and pan sizes
- Operating noises
- Using suitable induction cookware
- Temperature detection
- Protecting the cooktop surface
- Using the iQ Connect feature
- Using the hood control feature
- Maintaining your appliance
- Troubleshooting
- Warranty and Service
- Appendix
- Instrucciones de seguridad importantes
- Antes de comenzar
- Operación
- Encendido del electrodoméstico
- Selección de una zona de cocción y un ajuste de potencia
- Apagado del electrodoméstico
- Uso del bloqueo
- Temporizador
- Control de más potencia
- Gestión de potencia
- Pausa
- Zona Flex
- Activar o desactivar las señales sonoras
- Antes de usar la cubierta
- Utensilio de cocina para zonas de cocción por inducción
- Uso del tamaño de utensilio de cocina correcto
- Tamaño de ollas y sartenes
- Ruidos de funcionamiento
- Usar utensilios de cocina adecuados para inducción
- Detección de temperatura
- Protección de la superficie de cocción
- Uso de la función de conexión iQ
- Uso de la función de control de campana
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía y servicio técnico
- Apéndice
- Consignes de sécurité importantes
- Avant de commencer
- Fonctionnement
- Mise sous tension de l'appareil
- Sélectionner une zone de cuisson et un réglage de puissance
- Mise hors tension de l'appareil
- Utilisation de la fonction Verrouillage
- Minuterie
- Commande pleine puissance
- Gestion de la puissance
- Pause
- Zone flex zone
- Activation/Désactivation du son
- Avant d'utiliser la table de cuisson
- Récipients pour les zones de cuisson à induction
- Utiliser des récipients de taille adaptée
- Tailles de récipients et de casseroles
- Bruits de fonctionnement
- Utilisation des récipients adaptés à la cuisson à induction
- Détection de la température
- Protection de la surface lisse
- Utilisation de la fonction iQ Connect
- Utilisation de la fonction de contrôle de la hotte
- Entretien de votre appareil
- Dépannage
- Garantie et assistance
- Annexe
32 English
Maintaining your appliance
Maintaining your applianceMaintaining your appliance
Removing burned-on residue
1. Allow the cooktop to cool.
2. Spread a few drops of ceramic cooktop
cleaner on the entire burned residue
area.
3. Using a cleaning pad for ceramic
cooktops, rub the residue area, applying
pressure as needed.
4. If any residue remains, repeat the steps
listed above as needed.
5. For additional protection, after all
residue has been removed, polish the
entire surface by applying ceramic
cooktop cleaner with a paper towel.
Removing heavy, burned-on residue
1. Allow the cooktop to cool.
2. Use a single-edge razor-blade scraper
at approximately a 45° angle against
the glass surface and scrape the soil. It
will be necessary to apply pressure to
remove the residue.
3. After scraping with the razor scraper,
spread a few drops of ceramic cooktop
cleaner on the entire burned residue
area. Use a cleaning pad to remove any
remaining residue. (Do not scrape the
seal around the edges of the cooktop.)
4. For additional protection, after all
residue has been removed, polish the
entire surface by applying ceramic
cooktop cleaner with a paper towel.
Removing metal marks and scratches
1. Be careful not to slide pots and pans across your cooktop. It will leave marks
on the cooktop surface. You can remove these marks by applying ceramic
cooktop cleaner with a cleaning pad for ceramic cooktops.
2. If pots with a thin overlay of aluminum or copper are allowed to boil dry, the
overlay may leave black discoloration on the cooktop. You should remove this
discoloration immediately or it may become permanent.
WARNING
Carefully check the bottoms of pans for roughness that may scratch the cooktop.
Cleaning the cooktop seal
To clean the seal around the edges of
the glass, lay a wet cloth on it for a few
minutes, then wipe clean with a nonabrasive
cleaner.
DTI30P876BB,DTI36P876BB_DG68-01296A-00_EN+MES+CFR.indb 32 2020-06-02 �� 11:21:03