User Care Manual
Table Of Contents
- Important safety instructions
- Before you start
- Operation
- Switching the appliance on
- Selecting a cooking zone and power setting
- Switching the appliance off
- Using the Lock
- Timer
- Power boost control
- Power management
- Pause
- Flex zone
- Sound on/off
- Before using the cooktop
- Cookware for induction cooking zones
- Using the correct size cookware
- Pot and pan sizes
- Operating noises
- Using suitable induction cookware
- Temperature detection
- Protecting the cooktop surface
- Using the iQ Connect feature
- Using the hood control feature
- Maintaining your appliance
- Troubleshooting
- Warranty and Service
- Appendix
- Instrucciones de seguridad importantes
- Antes de comenzar
- Operación
- Encendido del electrodoméstico
- Selección de una zona de cocción y un ajuste de potencia
- Apagado del electrodoméstico
- Uso del bloqueo
- Temporizador
- Control de más potencia
- Gestión de potencia
- Pausa
- Zona Flex
- Activar o desactivar las señales sonoras
- Antes de usar la cubierta
- Utensilio de cocina para zonas de cocción por inducción
- Uso del tamaño de utensilio de cocina correcto
- Tamaño de ollas y sartenes
- Ruidos de funcionamiento
- Usar utensilios de cocina adecuados para inducción
- Detección de temperatura
- Protección de la superficie de cocción
- Uso de la función de conexión iQ
- Uso de la función de control de campana
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía y servicio técnico
- Apéndice
- Consignes de sécurité importantes
- Avant de commencer
- Fonctionnement
- Mise sous tension de l'appareil
- Sélectionner une zone de cuisson et un réglage de puissance
- Mise hors tension de l'appareil
- Utilisation de la fonction Verrouillage
- Minuterie
- Commande pleine puissance
- Gestion de la puissance
- Pause
- Zone flex zone
- Activation/Désactivation du son
- Avant d'utiliser la table de cuisson
- Récipients pour les zones de cuisson à induction
- Utiliser des récipients de taille adaptée
- Tailles de récipients et de casseroles
- Bruits de fonctionnement
- Utilisation des récipients adaptés à la cuisson à induction
- Détection de la température
- Protection de la surface lisse
- Utilisation de la fonction iQ Connect
- Utilisation de la fonction de contrôle de la hotte
- Entretien de votre appareil
- Dépannage
- Garantie et assistance
- Annexe
34 English
Troubleshooting
TroubleshootingTroubleshooting
Symptom Possible cause Solution
The boost
function has
been deactivated
or cannot be
activated.
A cooking position is
already paired, and the
cooktop is too hot.
You can activate the boost
function only once for a single
burner.
If a second cooking position
is switched on or is already in
operation, the boost function will
not be available or is deactivated,
and the cooking position returns
to power level 15.
The cooktop may be hot. Wait
until the cooktop cools down.
The cooktop
responds
unusually or
can no longer
be operated
correctly.
Disconnect the appliance from
the electric supply by switching
the circuit breaker off to the off
position for 15 seconds.
There are
cracking or
popping sounds.
The power level is set
between 1.0 and 3.0.
And two pots are put on
the Flex Zone.
This is normal. The strength of
sound depends on the number and
the size of the pots.
There are
beeping sounds.
Occurs if buttons are
repeatedly pressed.
Cookware is on the touch buttons,
and hot cookware can damage the
buttons.
Remove the cookware.
The cooktop
has stains or
discoloration.
Food spills/stains were
not cleaned.
See the Cleaning section on page
31.
The cooktop is hot. The cooktop may appear
discolored if it is hot.
This is temporary, and the
discoloration will disappear as the
cooktop cools.
Symptom Possible cause Solution
The cooktop
has scratches or
abrasions.
The cooktop is not being
correctly cleaned.
Scratches cannot be removed.
However, tiny scratches will
become less visible with cleaning.
Use glass-ceramic cleaning cream.
Do not use chemical or corrosive
agents.
These agents may damage the
cooktop.
Cookware with rough
bottoms were used.
There were coarse
particles such as salt
between the cookware
and cooktop.
To avoid scratches, follow
the recommended cleaning
instructions.
Before using, make sure cookware
bottoms are clean.
Only use smooth, at-bottomed
cookware.
Cookware may have slid
across the cooktop.
The cooktop
has metallic
discolorations.
Mineral deposits from
water and food have
stained the cooktop.
To remove the stains, use a
glassceramic cooktop cleaning
cream.
For best results and care, clean the
cooktop weekly.
Only use clean, dry cookware.
DTI30P876BB,DTI36P876BB_DG68-01296A-00_EN+MES+CFR.indb 34 2020-06-02 �� 11:21:04