Spec Sheet

DTT36M876 | 36-INCH 6-BURNER GAS RANGETOP
”
ACUTOUTWIDTH ”CM
BHOLEOFFSET /”CM
CDOWNDRAFTVENTCUTOUT /”CM
APPROVEDDOWNDRAFTVENTMODELS MRVMRV
36-INCH GAS RANGETOP
APPLIANCEDIMENSIONS
CABINET/COUNTERTOPDIMENSIONS
A
CA
BINET/COUNTERTOP CUTOUT DIMENSIONS
WITH DOWNDRAFT VENT  SIDE VIEW
28 /" (71.6CM)
27 /" (69.9CM)
25 /" (65.3CM)
22 /" (56.5CM)
36" (91.1CM
1 /" (3.8CM) TYPICAL
COUNTERTOP THICKNESS
INSTALLED CONTROL
PANEL OVERHANG
1 /” (3.5CM)
MOUNTING PLATFORM
COUNTERTOP
CABINET FACE
INSTALLED RANGETOP - SIDE VIEW
7/"
(19.7CM)
/" (1.3CM)
OVERHANG,
BOTH SIDES
MOUNTING PLATFORM 1”
(2.5CM) MIN THICKNESS
36" (91.4CM)
TYPICAL
10” (25.4CM) TO COMBUSTIBLE
SIDE WALL MIN. BOTH SIDES
CABINET / COUNTERTOP DIMENSIONS - FRONT VIEW
*NOTE: PRODUCT TOLERANCE +/- 1/16”
(+/- 1.6MM)-0 UNLESS OTHERWISE NOTED
*RECOMMENDED GAS &
ELECTRICAL SERVICE
LOCATION, CONSULT
LOCAL CODE
24" (61.0CM)
CABINET/COUNTERTOP CUTOUT DIMENSIONS WITHOUT
DOWNDRAFT VENT - TOP VIEW.
NOTE:Gas and electrical connections may only be routed through the bottom of the rangetop when installed with
a downdra vent.