Installation Instructions

Installation requirements
English24
Installation requirements
C
L
C
B
A
C
C
L
C
L
C
L
B
1/2” (1.3 cm)
countertop
overhang
1/2” (1.3 cm)
countertop
overhang
1 7/8" (4.8 cm)
Counterop
overhang
1” (2.5 cm)
typical 1 3/8”
(3.5 cm) max.
3/8” (1.0 cm)
countertop overhang
Hole 1/2” dia. (1.3 cm), 2 places,
through platform for hold down bolts
1” (2.5 cm) thick mounting platform min.
10” (25.4 cm) min.
to combustible wall
above countertop,
both sides
Gas/electrical utility cut-out in right rear corner of
mounting platform 8” W X 6” D (20.3 cm X 15.2 cm), if
gas and electrical are routed through bottom
24”
(61.0 cm)
min.
cabinet
depth
10 11/16”
(27.2 cm)
Cabinet face
below countertop
overhang
Increase countertop and overhang
additional 2 1/2” (6.4 cm) min.
for combustible rear wall above
countertop
Non-combustible
rear wall, rear of
mounting platform
Gas connection and power cord may be
routed through bottom or back of chassis
Gas and electrical connections at
right rear section of chassis
24” (61.0 cm)
Cabinet
face
Countertop
Mounting platform
Installed control
panel overhang
1 3/8” (3.5 cm)
Installed Rangetop - Side View
Countertop
Countertop
Cabinet/Countertop Cutout Dimensions without Downdraft Vent - Top View
Rangetop Model A B C
DTT36M976L* 36” (91.4 cm) 35” (88.9 cm) 16 5/8” (42.2 cm)
DTT48M976L* 48” (121.9 cm) 47” (119.4 cm) 20 13/16” (52.9 cm)