Installation Manual

ManualsBrandsDacor ManualsCooking Appliances48 Inch Gas Smart Rangetop with 6 Sealed Burners, Continuous Grates, Auto Connected Hood, SimmerSear™ Burners, Permaflame™, Illumina™ Knobs, and Electric Griddle: Graphite Stainless Steel, High Altitude Liquid Propane

English38

Installation instructions

Installation instructions

SimmerSear Burner Assembly (18K BTU Burner)

Keyed hole

Locating

tab

Burner base

Burner head

1. Put the burner heads in place as shown

below. The locating tab on the burner

head goes in the keyed hole as shown.

Tabs

Slots

Burner ring

2. Put the burner rings on the burner

heads as shown below. Match the tabs

on the bottom of the ring to the slots on

the burner head. Twist each ring back

and forth slightly to make sure it is

properly seated.

Ridge on bottom of burner cap

3. Put the burner caps on top of the

burner rings. You may use either the

supplied brass or porcelain caps. The

ridge around the bottom edge of the

cap goes around the top of the burner

ring.

WARNING

Be sure electrical power is off and all surfaces are cool before cleaning any part of the

cooktop.