Installation Instructions

INSTALLATION REQUIREMENTS

To accommodate the refrigerator, the cabinet “cutout” must

conform to these details:

• Cutout dimensions: 41 1/2”W x 84”H x 24”D (1054.1mm x

2134mm x 610mm).

• Install the refrigerator so it can be pulled from the cutout

for service/cleaning without detaching the water line.

• The cutout’s floor must be at the same level as the

kitchen floor. (The refrigerator cannot be on a raised

platform/flooring or sub-floor.)

• The refrigerator’s face (excl. handles) must be flush with

the cabinetry on either side.

• The water line can enter the cutout through the floor,

lower rear wall, or lower cabinetry side wall. (The graphic

shows the floor and side walls.) The shut-off valve must

be easily accessible for service/emergencies.

• The water line connects the house’s cold-water line with

the refrigerator’s water-line connector. (The line should

be long enough to reach the front of the refrigerator.)

• Dacor recommends that while preparing the refrigerator

for installation, you place a mat under the refrigerator to

prevent damage to the flooring.

Cabinet Cutout Dimensions

41 1/2” (1054.1 mm)