Installation Instructions

INSTALLATION INSTRUCTIONS

Aligning the Refrigerator Doors

Stand back from the refrigerator, and note the door

alignment. Shipping or custom installation of heavy door

panels may have caused the doors to misalign.

1. Remove the rubber cap from the door’s leveling leg, and

with a Phillips screwdriver, loosen (do not remove) the

leg’s locking screw so you can turn the leg.

2. With a 7/32” wrench, turn the leveling leg (clockwise:

lower; counterclockwise: higher) until the doors align

horizontally.

3. Tighten the locking screw, and replace the rubber cap

over the tip of the door-leveling mechanism.

Anchoring the Refrig. to Its Cabinet

Performing this optional procedure keeps the refrigerator

from being pulled from its cabinet.

1. Open the grill door to access the refrigerator side trim.

2. Through the provided holes in the trim, drive a screw

into the cabinetry side wall.

3. Repeat Steps 1, 2 on the other side of the refrigerator.

4. Press the main power switch to turn the refrigerator on,

and close the grill door.