Combined Configuration DYO Wall Oven_Microwave-In-A-Drawer_Warming Drawer

All specications subject to change without notice.
Phone: [phone]www.dacor.com
PLANNING
GUIDE
COMBINATION INSTALLATIONS
DYO Wall Oven/Microwave In-A-Drawer/
Warming Drawer
Document # PGCI-033
Revised 09/17/14 Page 1/1
NOTE:
1. 3/4” (1.9 cm) support platform (flush with cutout).
2. See individual appliance Planning Guide pages to
determine overlays.
3. Spacing between appliances and drawers/doors shown
is minimum required to allow for ventilation and prevent
scraping. Additional space may need to be added for
appearance.
CUTOUT DIMENSIONS
9 1/8”
(23.2 cm)
27 3/4”
(70.5 cm)
1 1/4” min.
(3.2 cm)
1 1/4” min.
(3.2 cm)
B
C
15 3/16”
(38.6 cm)
A
120 Vac electrical
outlet for microwave
240 Vac
wall oven
junction box
1
2” min. (5.1 cm)*
3/4” min.
(1.9 cm)
59 13/16”
(151.9 cm)
overall
stacked
height
120 Vac electrical outlet
for warming drawer
1
1
Wall Oven Models (A) Cutout Width
DYO130 28 1/2” (72.4 cm)
Warming Drawer
Models
(C) Cutout Width
30 inch 28 1/2” (72.4 cm)
Microwave
Model No.
(B) Cutout Width
MMD30(V) 28 1/2” (72.4 cm)
All tolerances: ±1/16” (±1.6 mm), unless otherwise stated.
WARNING
• Observe all governing codes and ordinances during
planning and installation. Contact your local building
department for further information.
• All appliances must be installed in accordance with the
accompanying installation instructions.
*3” (7.6 cm) Recommended