Dimensions Guide
Important: Dacor reserves the right to change specications without notice. Dimensions provided are for reference only. Before installation,
consult the installation instructions accompanying each product prior to selecting cabinetry, making cutouts or starting installation.
www.Dacor.com
Renaissance
®
Gas Range
Revised 06/02/15
Models:
Product tolerances: ±1/16” (±1.6 mm)
DYRTP366S/LP
DYRTP366S/LP/H
DYRTP366S/NG
DYRTP366S/NG/H
DYRTP486S/LP
DYRTP486S/LP/H
DYRTP486S/NG
DYRTP486S/NG/H
A
3 3/8”
(8.6 cm)
7/16”
(1.1 cm)
7 3/4”
(19.7 cm)
Trim:
1/4”
(6.4 mm)
thick
25 3/8” (64.5 cm)
1 1/4” (3.2 cm) cooking surface
height (grate level) above
countertop
3/4” NPT gas inlet, connects to regulator
from bottom or rear of unit, end is recessed
2” (5.1 cm) from chassis bottom
26 5/16” (66.8 cm)
27 5/16” (69.4 cm)
Power cord
40” long
1
Vertical to combusible surface from
rangetop grate level; if installing an
overhead vent hood, also check hood
specifications for minimum required
clearances.
2
See Cabinet/Countertop Dimensions
(Top View).
3
This specification not applicable for
cabinets more than a horizontal dis-
tance of 10” (25.4 cm) from the edge
of the rangetop.
Rangetop
Model
A B C
DYRTP366
35 7/8”
(91.1 cm)
36” (91.4 cm)
36” (91.4 cm)*
42” (106.7 cm)**
DYRTP486
47 7/8
(121.6 cm)
48” (121.9 cm)
48” (121.9 cm)*
54” (137.2 cm)**
* Minimum ** Recommended
See note 2
C
13” (33.0 cm)
max.
3
Top of
finished
counter
Grate
level
Grate
level
15” (40.6 cm)
min.
1, 3
30” (76.2 cm)
min.
1
Cutout for
utility access
B
C