Specifications

ManualsBrandsDacor ManualsGrillEOG36

IMPORTANT

1. Before beginning installation, please thoroughly read and become familiar with these instructions.

2. Installation and service must be completed by a qualified installer or service agency.

3. Installer: Please leave these Installation Instructions with the owner.

4. Owner: Please keep these instructions for local electrical inspector’s use and for future reference.

5. Read the accompanying Use & Care Manual prior to operating this appliance.

TABLE OF STEPS

STEP 1 Verifying the package contents Page 2

STEP 2 Planning installation - base construction structure with access doors Page 2-4

Planning installation - cart Page 5

STEP 3 Gas and electrical supply requirements Page 6-7

STEP 4 Gas connections Page 7-8

STEP 5 Connecting the electrical Page 8-9

STEP 6 Verifying proper operation Page 9

Part No. 65249 Rev. C

TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI Z21.58-1998, CGA 1.6-M98

STANDARD FOR OUTDOOR GAS COOKING APPLIANCES. IN CANADA: INSTALLATIONS

MUST BE IN ACCORDANCE WITH THE CURRENT CAN/CGA-B149.1. NATURAL GAS

INSTALLATION CODE CAN/CGA-B149.2. PROPANE INSTALLATION CODE AND/OR LOCAL

CODE.

NOTES:

Contain helpful hints and tips to facilitate the installation.

CONVENTIONS USED IN THESE INSTRUCTIONS

IMPORTANT:

Must be followed carefully to avoid damage.

WARNINGS:

Must be followed carefully to avoid personal injury.

SAVE AND READ THESE INSTRUCTIONS

Installation Instructions

Epicure™ Outdoor Grill

Summary of content (16 pages)

PAGE 1
Installation Instructions Epicure™ Outdoor Grill SAV EA ND REA DT HES E IN STR UCT ION S TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI Z21.58-1998, CGA 1.6-M98 STANDARD FOR OUTDOOR GAS COOKING APPLIANCES. IN CANADA: INSTALLATIONS MUST BE IN ACCORDANCE WITH THE CURRENT CAN/CGA-B149.1. NATURAL GAS INSTALLATION CODE CAN/CGA-B149.2. PROPANE INSTALLATION CODE AND/OR LOCAL CODE. CONVENTIONS USED IN THESE INSTRUCTIONS WARNINGS: Must be followed carefully to avoid personal injury.
PAGE 2
PAGE 3
FOR YOUR SAFETY If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. Open lid. 4. If odor continues, immediately call your gas supplier or your fire department. FOR YOUR SAFETY 1. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. 2. An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance. WARNINGS: 1. Read all instructions before using the appliance. 2.
PAGE 4
STEP 1 Verifying the Package Contents • • • • • Grease Tray Smoker Tray Warming Rack Regulator Match Holder EOG303/36/52 Models • Grills • Rotisserie - forks - rod - motor • cleaning cream • light lens prystick • Even Heat Channels EOG52 & EOSB162 Models • burner grate, caps, and cover STEP 2 Planning Installation - Base Construction Structure WARNINGS: 1.
PAGE 5
STEP 2 Planning Installation - Base Construction Structure (continued) Locate the electrical supply box within reach of the 48 inch (1219mm) long power cord so the connection is accessible when the grill is completely installed in the enclosure. For self contained LP-gas supply systems, refer to the detail in the Gas Installation section of this manual. LP-gas cylinder shall be ventilated by openings at the level of the cylinder valve and the floor level.
PAGE 6
STEP 2 Planning Installation - Base Construction Structure (continued) EOS16 16 1/8" (410mm) 6" x 6" (152mm x 152mm) Utility Cutout EOG30 - 30 1/2 (775mm) EOG36 - 36 1/2" (927mm) EOG52 - 52 1/2" (1334mm) 8" (203mm) Maximum 3/4" (19mm) Min. to any material 25" (635mm) 3/8" (10mm)ø Both sides 36" (914mm) 21" (533mm) EOG30 - 21" (533mm) EOG36/52 - 28" (711mm) 12" (305mm) Min.
PAGE 7
STEP 2 Planning Installation - Cart IMPORTANT: 1. Excessive weight warning - Both the cart and the grill are extremely heavy and this installation assembly process should be accomplished by a minimum of two people. 2. Sheet metal edges can be dangerous in heavy lifting situations, please wear gloves during assembly. 3. To lighten the grill before assembly, remove individual components box packed inside the grill. 4. Remove the cart from the shipping pallet before installation assembly. NOTES: 1.
PAGE 8
STEP 3 Gas and Electrical Supply Requirements WARNING: Electrical grounding instructions This outdoor cooking gas appliance is equipped with a three-prong grounding plug for your protection against shock hazard and should be plugged into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from the plug. NOTES: 1. If the gas or electric service provided does not meet the product specifications, do not proceed with the installation. 2.
PAGE 9
STEP 3 Gas and Electrical Supply Requirements WARNINGS: 1. 2. 3. 4. 5. 6. 7. 8. The maximum gas supply pressure to the regulator must not exceed 1/2 pound per square inch. Verify proper gas supply has been provided. Refer to Table 1. Do not apply excessive pressure when tightening connections and fittings. Do not use plumber’s putty or Teflon tape on gas compression connections. It can defeat the proper sealing of these fittings. Use plumber’s putty or Teflon tape only on pipe thread fittings.
PAGE 10
STEP 4 Gas Connections (continued) Liquid Propane (LP) Connections WARNINGS: 1. A dented or rusty LP tank may be hazardous and should be checked by your LP supplier. 2. Never use a cylinder with a damaged valve. 3. A Portable Liquid Propane tank should be a 5 gallon, 20 lb. gas cylinder approximately 12 inches (305mm) in diameter and 18 inches (457mm) high, which must be constructed and marked in accordance with the specification for Liquid Propane (LP) gas cylinders of the U.S.
PAGE 11
STEP 5 Connecting the Electrical (continued) Plug the factory supplied, three-prong plug located at the bottom back right corner of the grill into the grounded receptacle. Also, install the rotisserie motor and spit at this time (Use and Care instruction for proper rotisserie installation) be sure to plug only into a grounded receptacle. Three-Prong Plug Figure 8: Three-Prong Plug and Receptacle Three-prong grounded receptacle and cover plate STEP 6 Verifying Proper Operation WARNINGS: 1.
PAGE 12
W W W BK BK INDICATOR W W BK BK LIGHTS BK BK BK BK BK 3-PRONG S1 S2 S3 S4 PLUG GN BK W BK W SUPPLY CORD & STRAIN RELIEF BK BK BK BK FOR OUTDOOR USE BK BK GN BK BK W GN BK BK N BK BK BK 4 3 A 2 L1 BK BK 1 W N W 4 POINT RE-IGNITOR TERMINAL BLOCK S4 S2 S3 S1 3-PRONG O BK BK PLUG ROTISSERIE BOX DIAGRAM BK IGNITION 10W,12V PLUGS LEFT HALOGEN LIGHT LEFT GRILL INFARED BURNER BURNER RIGHT GRILL BK W GN BK W GN CENTER GRILL BURNER SUPPLY CO
PAGE 13
NOTES: Page 11
PAGE 14
NOTES: Page 12
PAGE 15
PAGE 16
Web Site: www.dacor.