Installation guide

Installing the Exhaust Grill
With the oven secured to the cabinet, install the exhaust
grill by mounting it to the oven with the two (2) provided
screws.
Reinstalling the Oven Doors
[_ WARNING
Failure to fully rotate the hinge Catches will result in a
safety hazard and may cause persona! injurY due to the
door falling off its hinges. Also damage to the oven and!or
improper door alignment may occur.
[_ CAUTION
On double ovensl install the top door first to reduCe the
chance of damaging the lower door during installation.
NOTE: To re-install the oven door on model EORS136,
see page 14.
1. Grasp the oven door on opposite sides and lift it until
the door hinges are aligned with the openings in the
oven frame.
2. Holding the door at about a 30° angle from the horizon-
tal, slide the hinges into the openings until the bottom
hinge arms drop fully into the hinge receptacles.
Insert door at
30° angle
,
Lower the door to the fully opened position. Rotate both
hinge catches toward the oven. Open and close the
door slowly and completely to ensure that it is properly
installed.
Catch
ctacor 13