Troubleshooting guide

Page 9-24
DACOR RANGE SERVICE MANUAL
Oven Component Repair (continued)
Broil element for right oven on Model ER48D
and oven on Model ER36D:
Turn off the gas supply at the supply valve
and power to the range at the junction or fuse
box.
Remove the oven door as described on page
8-1.
Remove the oven racks.
Remove the screws that hold the bake
element frame D in place on the floor of the
o
ven.
•
•
•
•
Remove the bake element frame and
glass E .
If replacing the bak
e element F , pull it up
and out of the floor of the ov
en.
•
•
Label the wires that connect to the bake
element terminals G . When reconnecting the
wires, mak
e sure that the wires are connected
to the proper terminal.
If replacing the bake element glass, make
sure that the smooth side of the glass is
facing up when placing it in the oven.
When reassembling the bake element in the
floor of the oven, place the bake element
glass inside the bake element frame and place
it over the top of the bake element in the
floor of the oven.
Hold the bake element frame in place with
one hand while replacing the eight (8)
existing screws that hold it in place.
Reinstall the racks.
Reinstall the oven door(s) as described on
page 8-2.
Test the oven to ensure that repairs were
properly completed.
•
•
•
•
•
•
•
D
E
F
G