Specifications

Removing the Oven Door Electrical Connection
To make the range easier to move, remove the door to reduce
weight.
1. Open the door to its fully opened position.
2. Rotate the catch over the retaining arm on each hinge.
Retaining arm
3. Lift the oven door to about a 15° angle from the vertical
position.
4. Hold the door with both hands just below the handle and pull
it away from the oven while continuing to lift.
12 =::_acar
Door Gripping Points
NOTE: Freestanding model ER30D-C is wired for use in Canada
and comes from the factory pre-wired. If installing a pre-wired
range, skip to Gas Supply Connection on page 17.
Put slack in
electrical wiring
and gas line
IMPORTANT:
• Make sure that the conduit or appliance cord is tong enough
to allow the range to be pulled out for service without
disconnecting it from power.
• Do not disconnect any of the wires inside the range electrical
box unless instructed to do so.
Electrical access cover
i _ i[[
Back
k]
range