Product specifications

Page 4
Page 5
STEP 6
Overall Dimensions
27" (686mm)
26" (660mm)
28 1/2" (724mm)
37”
(940mm)
to
35 3/4"
(908mm)
Finished Side Panel
24 3/8" (619mm)
Rear of Control Panel/Oven Door
Face of Control Panel/Oven Door
Fr
ont Edge of Bullnose
Handle
6” (152mm) Backguard
When Backguard and
Side Panels are removed,
the overall depth decreases
by 1" (25mm)
Accessory 3” (76mm) Side Panels
(Dacor Model No. AESP03)
1 9/16"
(40mm)
29 1/8" (740mm)
28 1/8" (714mm)
30 3/8" (772mm)
1 9/16"
(40mm)
37”
(940mm)
to
35 3/4"
(908mm)

Finished Side
Panel
26 1/2" (673mm)
Rear of Control Panel/Oven Door
Face of Control Panel/Oven Door
Fr
ont Edge of Bullnose
Handle
9"
(229mm)
3"
(79mm)
15 1/4"
(387mm)
24"(610mm)
Backguard
9" (229mm)
Backguard
3" (76mm)
Backguard
19"
(483mm)
ERD/EGR30, ERD60 Overall Dimensions
Side View
(ERD30 shown)
ERD36, ERDE36, ERD48 & ERDE48 Overall Dimensions
Side View
NOTE:
For ERD all front-to-back depth
dimensions are reduced by 1”
(25mm) when Backguard and full
side panels are removed.
NOTE:
For Backguard Installation (36” and 48” models)
see page 6. Always install backguard before
installation of the range.
STEP 7
Installing the Anti-Tip Bracket (30” & 36” Models Only)
Back wall
7 1/2"
(191mm)
4 13/16" (122mm)
24" (610mm)
36 1/16" (916mm)
18 1/32"
(458mm)
All dimensions are from
cabinet only
(not countertop)
WARNING:
The 30” and 36” ranges require an anti-tip device. Before installing the range, you must locate and
secure the anti-tip bracket to the floor.
Installation of ERD30 Anti-Tip Bracket
Top View
Rear Wall
8 3/8”
(213mm)
24"
(610mm)
30 1/16" (764mm)
All Dimensions are from
Cabinet Only
(Not Countertop)
Floor
2 3/16”
(56mm)
3 7/8" (98mm)
1 1/2" (38mm)
Left
Rear
Leg
Leveler
5/16 - 18 x 2
or Equivalent
Rear
Location of ERD30 Anti-Tip Leveler
Installation of ERD36 Anti-Tip Bracket
Top View
Right
Rear
Leg
Leveler
5/16 - 18 X 2
or Equiv. 
Rear
Location of ERD36 Anti-Tip Leveler