Installation guide

Installation Instructions
Electrical connection
from raised vent,
match Wire Colors
Front of raised vent
CABP3S cabinet
blower
Electrical access
/N\ Raised vent
blower wiring
access hole
Electrical Installation - CABP3 Cabinet Blower
Connect wires/conduit
according to remote
Raised vent blower installation
\ instructions
See Raised Vent
Electrical Access
Range Panel, above
J Wiring/conduit from
raised vent to remote
(or in-line) blower
Floor |
Match wire colors to
terminals as shown.
Wires to power plug.
Pre-wired at factory.
Do not modify.
Attach ground wire Blower power wiring/conduit.
as shown
Connect other end of wires
to blower terminal block.
Wire Colors : Black = Line (L), White = Neutral (N),
Green = Ground (Gnd)
Raised Vent Electrical Access Panel
REMP16
-_ remote blower
Example of Electrical Installation
with ILHSF or REMP Series Blower
(Side View)
dacor 13