Planning Guides ERV-ER?? PDF [0.75 MB]
PLANNING
GUIDE
www.Dacor.com
Phone: (800) 793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
8.6
36” and 48” Wide
Slim Raised Vent for Epicure
®
Range
ERV36-ER, ERV48-ER
ExhAUst oUtLEt LocAtIoN oPtIoNs
froNt vIEw
sIDE vIEw
All tolerances: ±1/16” (±1.6 mm) unless otherwise stated
ADt2 trANsItIoN (INcLUDED)
wIrING/coNDUIt coNNEctIoNs for
rEmotE/IN-LINE bLowEr
3 1/4” X 10” to duct work
2” X 16”, connects to
side or bottom exhaust
on raised vent
1"
(25 mm)
5"
(127 mm)
Blower wiring access
hole in bottom
Front of unit
Blower wiring
access hole in
side
Document # PG08-002
Revised 04/30/09 Page 3/3
Rear Exhaust Knock Out (3 1/4” X 10”)
3”
Vertical center line of rear exhaust knock out lines up with vertical
center line of chassis
On 46” and 48” wide models, the vertical center line of bottom knock-
out lines up with vertical center line of chassis
On 30” and 36” wide models, the vertical center line of bottom knock-
out is offset 3”
Side Exhaust Knock Outs (1 5/8” X 16”)
Bottom Exhaust Knock Out (1 5/8” X 16”)
Motor
cover
Front of unit
26" (660 mm)
6 1/4"
(159 mm)
1 1/8"
(29 mm)
C
L
C
L
C
L