Planning Guides ERV - PRV?? PDF [0.5 MB]

PLANNING
GUIDE
Web: http://www.Dacor.com
Corporate Phone: [phone]
Specifications are subject to change without notice.
See installation instructions for additional details.
8.3
30”, 36”, 46”, 48” Wide,
Slim Raised Vent
ERV30, ERV36, ERV48,
PRV30, PRV36, PRV46
3/3
EXHAUST OUTLET LOCATION OPTIONS
FRONT VIEW
SIDE VIEW
Raised Vent System Specifications
Raised Vent
Model No.
For Use
with Blower*
Duct Sizes
Approximate
Shipping Weight
ERV/PRV30
REMP3 or REMP16
3 1/4”x10”, 8” or 10”
48 lbs./50 lbs.
ERV/PRV36 3 1/4”x10”, 8” or 10”
55 lbs./57 lbs.
PRV46 3 1/4”x10”, 8” or 10”
67 lbs.
ERV48 3 1/4”x10”, 8” or 10”
69 lbs.
*For detailed information on the remote blowers,
refer to the Remote Blowers Installation Instructions.
Revised
2/10/09
All tolerances: ±1/16” (±1.6mm) unless otherwise stated
 Rear Exhaust Knock Out (3 1/4” X 10”)
3”

 Vertical center line of rear exhaust knock out lines up with vertical
center line of chassis

 On 46” and 48” wide models, the vertical center line of bottom knock-
out lines up with vertical center line of chassis

 On 30” and 36” wide models, the vertical center line of bottom knock-
out is offset 3”


Side Exhaust Knock Outs (1 5/8” X 16”)



 Bottom Exhaust Knock Out (1 5/8” X 16”)


Motor
Cover
26" (660 mm)
6 1/4"
(159 mm)
1 1/8"
(29 mm)
C
L
C
L
C
L
ADT2 TRANSITION (INCLUDED)
3 1/4” X 10” to duct work
2” X 16”, connects to side or
bottom exhaust on raised vent
1"
(25 mm)
5"
(127 mm)