User Manual

4
Installing a Standard Burner
Be sure to match the right-size components with each other.
1. Align the hole near the rim of the burner head with the ignitor
on the base.
2. Place the burner ring on the burner head.
3. Put the burner ring on the head. Slightly turn the ring to make
sure it seats properly.
4. Lay the cap on the burner ring. Make sure the ridge of the cap
fits around rim of the ring.
Installing the Burners and Grates
WARNING
Assemble the burners and grates only when the cooktop is cool.
Installing the SimmerSear
TM
Burner
Be sure to match the right-size components with each other.
1. Place the SimmerSear™ burner ring on the SimmerSear™
base (center of cooktop).
2. Align the burner-ring gaps with the pins on the burner base.
3. Seat the outer SimmerSear™ burner cap on the burner ring.
Make sure it is centered and fully seated.
4. Place the inner SimmerSear™ burner cap in the center of the
base. Seat the cap on the pins in the center of the base.
SimmerSear
TM
Burner Assembly
(center burner)
Igniter
Burner cap
(bottom)
Burner
ring
Burner
head
Burner
base
Igniter goes
through hole
Standard Burner Assembly
Setting Up the Cooktop
Inner burner cap
Outer burner cap
Burner ring
Pin on
burner base
Ridge on
bottom
CAUTION: Igniter
tip is sharp