Planning Guide
All specications subject to change without notice.
Phone: (800) 793-0093www.dacor.com
PLANNING
GUIDE
4.18
RNCT305G, RNCT365G
Renaissance
®
30” and 36” Wide
Drop-in Gas Cooktops
Document # PG04-011
Revised 0706/16 Page 1/4
A
2" (5.1 cm)
from countertop
to cooking surface
21"
(53.3 cm)
4" (10.2 cm)
chassis height
Product dimensions
Front of unit
Power cord
42” (106.7 cm) long
1/2” male
NPT gas inlet
2”
(5.1 cm)
1 3/4”
(4.4 cm)
1/2” male NPT
gas inlet*
Power
cord
Chassis
Front of cooktop
Top panel overhang
*Gas inlet extends 1” (2.5 cm) from bottom
1 3/4”
(4.4 cm)
UTILITY LOCATIONS UTILITY DIMENSIONS
Product tolerances ±1/16” (±1.6 mm) unless otherwise
WARNING
• Observe all governing codes and ordinances during planning
and installation.
• Contact your local building department for further information.
• This appliance must be installed in accordance with the
accompanying installation instructions.
Side View
Rear
overhang
Front
overhang
19 9/32” (49.0 cm)
17/32”
(1.3 cm)
1 3/16
”
(3.0 cm)
Front View
B
1 11/32”
(3.4 cm)
1 11/32”
(3.4 cm)
Model A B
RNCT305G 30” (76.2 cm) 27 5/16” (69.4 cm)
RNCT365G 36” (91.4 cm) 33 5/16” (84.6 cm)