installation instructions

7
4 1/4" (10.8 cm) min.
from mounting surface to
combustibles below
cooktop chassis
E
F
C
D
Min. distance to combustible side
wall above countertop (both sides)
F
Vertical
combustible
surface
Rear
wall
1 7/8" min.
(4.8 cm)
Installation Specifications
Cutout Dimensions
Countertop Cutout Dimensions
All tolerances ±1/16” (±1.6 mm)
unless otherwise noted.
Installation Type (C) Minimum (D) (E) (F)
HDCT304 (no downdraft) 2 ” (7.3 cm) 19 ¾” (50.2 cm)
27 ” (70.1 cm) 7 ½” (19.1 cm)
HDCT304 (with MRV3015S) ” (1.0 cm) 22 ½” (57.2 cm)
HDCT365 (no downdraft) 2 ” (7.3 cm) 19 ¾” (50.2 cm)
33 ¾” (85.7 cm) 7” (17.8 cm)
HDCT365 (with MRV3615S) ” (1.0 cm) 22 ½” (57.2 cm)
Countertop Cutout View
Cooktop with Downdraft: MRV Series
HPCT Gas Cooktop
Stiffener
Cabinet face
Countertop
Floor
3/8” min. (1.0 cm) space
behind downdraft
to clear stiffener
23 3/8” (59.4 cm)
3/8” min. (1.0 cm)
required for downdraft
cap clearance
ERV or PRV Series
Downdraft: check
downdraft specifications
to determine correct fit
DYCT Gas Cooktop
MRVxx15S series
downdraft: Check downdraft
specifications to determine
correct fit
HDCT Gas Cooktop
3/8” (1.0 cm) min. space
behind downdraft
to clear stiffener
Cabinet face
Countertop
Stiffener
23 3/8” (59.4 cm)
3/8” (1.0 cm)
needed for downdraft
cap clearance
Floor
HDCT Gas Cooktop