installation instructions
21
Installation Instructions
Making the Electrical Connection, cont.
Connecting the Conduit to the Home Junction Box
• The power supply must be properly polarized so the burner igniters do not keep sparking after ignition.
• If you are unsure the power supply is properly polarized/grounded, have it checked by a licensed electrician.
With the range in front of the cabinet cutout, feed the conduit wires
supply wire in the junction box.
3.
5. (4-wire only)
-
–
to connect to the pipe via a clamp and external grounding
connector screw.
– If materials isolate the cold-water pipe from ground, jumper
Replace the junction-box cover.
4-Wire Conduit Connection to
Junction Box
3-Wire Conduit Connection to
Junction Box
4-Wire Conduit Connection to
Junction Box w/External Ground