installation instructions
23
Installation Instructions
Verifying Proper Operation
•
service, and warranty information.
•
•
•
•
Turn off all cooktop cook zones and the oven.
Turn on power to the range at the power source.
3. Follow the prompts on the oven display to establish user preferences and wireless-network settings.
On the display, touch MENU > BAKE.
The default bake temperature appears on the display.
5. Touch START/CONTINUE, and wait 3 minutes.
Open the door to verify that the oven is heating.
BAKE and the preheating temp appear on the display.
Touch CANCEL/SECURE.
The oven's bake element turns off.
8.
A red dot appears above the icon, indicating the cooktop is on.
Tap the left end of the cook-zone slider.
Move your finger back and forth along the slider.
The zone’s digital readout and heat-level ramp change as your finger passes over a heat level.
• If the cook zone HOT indicator appears, it will stay on until the cook zone is safe to touch.
• In testing other cook zones, take care not to touch the cooktop surface while any HOT indicators appear.
The red dot above the icon goes out; the cooktop is off.