User Manual
27
Operating the Oven
Control-Panel Settings
Setting the Clock
1. On the control panel, tap CLOCK.
The colon between the minutes and seconds blinks.
2. On the numeric pad, enter the current time.
3. Tap #, and set AM or PM.
4. Tap START or CLOCK.
The colon stops blinking; the time of day is set.
• After tapping CLOCK, perform Steps 2 – 4 within 6 seconds or the previously set time reappears.
•
•
Switching to Military Time (24-hr Clock)
1. CLOCK for 6 seconds.
The displays shows the time in standard mode.
2. On the numeric pad, tap #.
3. Tap CANCEL/SECURE.
The main display shows the time in military mode.
Setting the Temperature Scale
Fahrenheit (default) and Celsius are available.
1. BROIL for 6 seconds.
The current temp scale appears on the display.
2. On the numeric pad, tap #.
The display shows the selected temperature scale (F or C).
3. Tap CANCEL/SECURE.
The selected temperature scale is set.
About the Control-Panel "Beep"
The control panel beeps: 1) if you tap a key, 2) when a timer reaches zero, 3) if there is an error, and 4) when the
oven performs certain set functions. You can silence/activate the beep as desired.
1. START TIME for 6 seconds.
"Beep" appears on the display.
2. On the numeric pad, tap # > CANCEL/SECURE.
The beep is enabled/disabled.