installation instructions

8
Installation Instructions
Unpack the Rangetop
WARNING
• If the gas and electric service provided does not
meet the product specifications, do not proceed with
the installation. Call the dealer, the gas supplier or a
licensed electrician.
• The rangetop is heavy. A minimum of two people are
required to safely install it.
Unpack the parts box and verify that all required compo-
nents have been provided. If any item is missing or dam-
aged, please contact your dealer immediately. Do not install
a damaged or incomplete appliance. The customer must
report cosmetic issues within 30 days of installation.
• 3 Grates
• 8 standard burner caps (4 brass, 4 porcelain)*
• 4 standard burner rings
• 4 SimmerSear™ burner caps (2 brass, 2 porcelain)*
• 2 SimmerSear burner rings
• 2 SimmerSear burner heads
• 4 standard knobs
• 2 MAX GRIDDLE knobs
• Dacor Stainless Steel Cleaner
• WOK ring
• Griddle
• 2 hold down bolts
• 2 washers (for hold down bolts)
• Gas regulator
• Product literature
*The rangetop is supplied with two different types of burner
caps (brass and porcelain) to suit the customer’s prefer-
ence.
Rangetop Installation
WARNING
• To prevent damage to the gas pressure regulator,
install it only after the rangetop is mounted in its per-
manent position.
• Do not over-tighten the hold down bolts. Over tight-
ening the hold down bolts may result in improper
burner operation.
IMPORTANT
Do not use a hardening compound or caulk to
permanently seal the rangetop into place. The rangetop
must be readily removable if service is required. Removal
of sealant to service the unit will be performed at the
customer’s expense.
1. Lower the rangetop into the cutout while feeding the
electrical cord into the utility cutout. Center the ran-
getop in the cutout.
2. Secure the rangetop to the countertop using the two
(2) provided hold-down bolts and washers provided. Do
not overtighten the bolts.