Planning Guide

PLANNING
GUIDE
All specications subject to change without notice. www.dacor.com Ph. 800.793.0093
Rangetop Approved Downdraft Vents*
HRTP366 MRV3615
HRTP486 MRV48
*Use only the downdraft vents specified.
Heritage
®
36”, 48” Wide
Slide-In Gas Rangetop
Page 3 of 3
All tolerances: ±¹/₁₆” (±1.6 mm), unless otherwise stated.
HRTP366, HRTP486
Model B (Cutout Width) D (Hole Offset) E (Downdraft Vent Cutout)
HRTP366 36” (91.4 cm) 16 ” (42.2 cm) 33 ” (85.1 cm)
HRTP486 48” (121.9 cm) 20 ¹³/₁₆” (52.9 cm) 43 ” (110.5 cm)
Cabinet and Countertop Layout (with downdraft vent)
NOTE:
The power cord and gas-supply conduit may be routed
through the bottom or back of the rangetop chassis.